TOHATSU MFS 20C User Manual

5
5-53
4st 9.9/15/20 2008
18. Install oil filter and tighten it to specified torque by using oil
filter wrench.
t
y
r
For installation procedure, refer to "Chapter 5
Installation of Cylinder Head".
17. Install exhaust cover r, and then install thermostat t, new
gasket and thermostat cover y.
Install thermostat with the notch (shown by
arrow) facing upward.
19. Install cylinder head and cylinder head cover u.
Oil Filter Wrench :
P/N. 3AC-99090-0
Oil Filter :
18 N · m (13 lb · ft) [1.8 kgf · m]
Apply thin coat of engine oil to O-ring before
installing oil filter.
u
i
20. Install fuel pump i.
Apply engine oil to fuel pump cam surface.
E_MFS20C_ch05_090105.qxd 09.1.20 5:25 PM ページ 53

TOHATSU MFS 20C Specifications

General

Brand	TOHATSU
Model	MFS 20C
Category	Outboard Motor
Language	English