TOHATSU MFS 20C User Manual

3-16
Maintenance
4st 9.9/15/20 2008
1
5. Reinstall key and flywheel 1 and tighten nut to specified
torque.
6. Reinstall starter pulley, recoil starter and belt cover.
Flywheel Puller Kit :
P/N. 369-72211-0
Flywheel Nut :
80 N · m (58 lb · ft) [8 kgf · m]
4. Install coil bracket ass'y and alternator, apply "Three Bond"
1342 to bolts, and tighten them to specified torque.
Reconnect couplers (4) of alternator and pulser coil.
3. Reinstall hanger 4 and tighten bolt to specified torque.
Hanger Bolt :
23 N · m (17 lb · ft) [2.3 kgf · m]
Coil Bracket and Alternator Bolts :
6 N · m (4 lb · ft) [0.6 kgf · m]
4
2
11
2
7. Reconnect upper starter lock cable.
E_MFS20C_ch03_090105.qxd 09.1.20 5:23 PM ページ 16

TOHATSU MFS 20C Specifications

General

Brand	TOHATSU
Model	MFS 20C
Category	Outboard Motor
Language	English