Tokheim Quantium 210 - Q110 and Q210 Hose and Pump Configurations

Document Ref 947571-001 Rev 2 Page 2-5
Quantium 110 & 210 Installation Manual Site Preparation
2.2 Q110 and Q210 Hose and Pump Configurations
The diagram below shows the possible functioning positions of the Q110 dispenser.
PASV3 Hi
g
h Power 40 or 80, Shared 130
Submer
g
ed 40 or 40/80 or 80 or 130
Any Product + 1 Hose =
Any Product + 2 Hose =
TQP Low Power 40 or 40/80 or 80
PASV3 High Power 130
Submer
g
ed 40 or 40/80 or 80 or 130
Hose outlet positions
Product pipe only for TQP
Vapour recovery (default)
or
Suction pipe for PAS V3
Electrical supply
Side A
Side B
B1
A1
B2
A2