Page 5-6 Document Ref 947571-001 Rev 2
Installation Quantium 110 & 210 Installation Manual
WASHER
min thickness = 2mm
min dia = 25mm
Underside of
dispenser driptray
M12 ANCHOR BOLT FOR
CONCRETE high tensile
100
Min depth into
concrete = 100mm
TYPICAL FIXING INTO THIRD PARTY GROUNDFRAME / SUMP
FRAME
M12 NUT
Alternative to nut & washer :-
Welded nut on groundframe
with min. 5 captured threads
M12 BOLT high tensile
WASHERS
min thickness = 2mm
min dia = 25mm
Steel groundframe/
sump frame
Underside of
dispenser driptray
5.4.2 FIXING TO GROUND
The following information relates to a typical Tokheim dispenser, unmodified
by the user, with no additional advertisement boards, canopies or items added
to the dispenser. Any such modifications may affect the stability and have
warranty/liability consequences.
IMPORTANT:- Tokheim dispensers must be secured to the ground using
all 4 mounting positions provided in the driptray - refer to the groundplan
drawings in section 3 for mounting hole positions.
TYPICAL FIXING INTO CONCRETE (NO GROUNDFRAME)
TYPICAL FIXING INTO TOKHEIM GROUNDFRAME
Nut insert
Tokheim groundframe
Underside of
dispenser driptray
M10 BOLT high tensile
WASHER
min thickness 2mm
min dia 25mm
To Next Page
Loading...
