Page 5-4 Document Ref 947571-001 Rev 2
Installation Quantium 110 & 210 Installation Manual
5.4.1 BY FORKLIFT
1) Lift the dispenser using a forklift truck under the pallet. Position the dispenser
close to the dispenser island. Ensure side A with the inlet connections is correctly
positioned - refer to section 5.2 for the identification of side A.
2) Remove the hydraulic doors. Unbolt the pallet from the base of the dispenser.
IMPORTANT - Where supplied, the leak plate must be placed in the ground PRIOR
to positioning the dispenser. Once placed, the leak plate must be sealed to the ground
frame and to the dispenser using a suitable sealant.
To Next Page
Loading...
