@
ToolkitRC
2019
F: The main port is full voltage or a single chip is full
voltage
289.8W: Charge or discharge power of the charger
42'C: internal temperature of the charger
050:20: The time when the work has started. Unit:
minute: second
3300mAh: the capacity that has been charged and
discharged this time
Lipo 6S: currently set battery type and number of
strings
12.0A: Current operating current set. Long press to
modify.
20.11V: Input supply voltage
4.1Wh: Input power that has been discharged from
the power supply.
1 4.20V: 1st battery voltage
2 4.20V: 2nd battery voltage
3 4.21V: 3rd battery voltage
4 4.22V: 4th battery voltage (the battery is being
balanced)
5 4.19V: 5th battery voltage
6 4.22V: 6th battery voltage (the battery is being
balanced)
-.--V : no battery connected
To end the charge and discharge work, short press
[Exit], in the pop-up prompt box, select [OK] to exit.
When charging is complete, or charging is wrong.
To Next Page
Loading...
