@
ToolkitRC
2019
A pop-up windows display and a tone sounds.
=================================
1.Charging or discharging, should be under
supervise throughout the process, in time to
deal with abnormalities.
2. When charging and discharging the lithium
battery, if only connect with the main port, battery
will not be balanced. Please pay attention to the
balance of the battery. Connect the battery with
balance port, the balance management is
automatically performed.
3, charging is completed, unplug the battery, after
accessing the new battery, it will automatically
continue to charge and discharge according to the
setting mode. When set to a fixed number of strings,
you need to access the same number of batteries.
When setting to automatically detect the number of
battery strings, please pay attention to whether the
number of detected strings matches the actual ones.
To Next Page
Loading...
