Topcon DC-4 - Functions of the real-time setting

26
OPERATION OF Ez Capture for DC-4
Functions of the real-time setting
You can change the photography parameters in real time.
The settings changed with this tool bar are only temporary and are not saved.
Item Description Set value
Preset The preset data for the parameters
to be used for photography are
changed.
Default Setting
(You can add the setting optionally.)
Sensitivity Sets the ISO sensitivity. ISO 100 / ISO 200 / ISO 400 /
ISO 800
Shutter speed Sets the shutter speed. 1/15 / 1/20 / 1/25 / 1/30 / 1/40 /
1/50 / 1/60 / 1/80 / 1/100 / 1/125 /
1/160 / 1/200 / 1/250
Auto brightness Place a mark in the checkbox. The
auto brightness adjustment function
is valid.
ON/OFF
Target value Sets the aimed value of brightness
when the auto brightness adjust-
ment is valid.
When the value is lower, the image
is darker. When the value is higher,
it is brighter.
2 - 253
Color balance Changes the preset data of color
balance.
This item is valid only when
"color photography" is
selected as the color type.
LED/Halogen
(You can add the setting optionally.)
Displays the photography parame-
ters setting dialog box.
—