Topcon ES-52 - Page 144

22. INTERSECTIONS
136
• When [LOAD] is pressed,
registered coordinates can be
recalled and used.
"12.1 Entering Instrument
Station Data and Azimuth
Angle PROCEDURE Reading
in Registered Coordinate
Data"
• [REC]: records the coordinate
value as a known point data.
•Press [MEAS] to observe the
selected point.
• The tilt screen is displayed if the
instrument is out of level.
Level the instrument.
"7.2 Levelling"
3. Enter the 2nd point data and press
[OK].
•Press [MEAS] to observe the
selected point.
4. Enter azimuth angle (or horizontal
distance) of the 1st point and 2nd
point.
:
Both the azimuth angle and
horizontal distance of the 1st (or
2nd) point cannot be input.
PT
OK
Define 2nd PT
Ep:
Np:
Zp:
112.706
104.069
11.775

RECLOAD MEAS OK
: 50.000m
Azmth1
H.dist1
Azmth2
H.dist2
: <Null>
:
: 45 00’00"
COORD OK