Foreword
3
User
1) This product is for professional use only!
The user is required to be a qualified surveyor or have a good knowledge of surveying, in
order to understand the user and safety instructions, before operating, inspecting or adjusting.
2) Wear the required protectors (safety shoes, helmet, etc.) when operating.
Exceptions from Responsibility
1) The user of this product is expected to follow all operating instructions and make periodic
checks of the product’s performance.
2) The manufacturer, or its representatives, assumes no responsibility for results of a faulty or
intentional usage or misuse including any direct, indirect, consequential damage, and loss of
profits.
3) The manufacturer, or its representatives, assumes no responsibility for consequential
damage, and loss of profits by any disaster, (an earthquake, storms, floods etc.).
A fire, accident, or an act of a third party and/or a usage any other usual conditions.
4) The manufacturer, or its representatives, assumes no responsibility for any damage, and loss
of profits due to a change of data, loss of data, an interruption of business etc., caused by
using the product or an unusable product.
5) The manufacturer, or its representatives, assumes no responsibility for any damage, and loss
of profits caused by usage except for explained in the user manual.
6) The manufacturer, or its representatives, assumes no responsibility for damage caused by
wrong movement, or action due to connecting with other products.
Laser Safety
This product uses the invisible laser beam to communicate. This product is manufactured and
sold in accordance with “Performance Standards for Light-Emitting Products” (FDA/BRH 21 CFR
1040) or “Radiation Safety of Laser Products, Equipment Classification, Requirements and User’s
Guide” (IEC Publication 825) provided on the safety standards for laser beam.
As per the said standard, this product is classified as “Class 1 (I) Laser Products”.
This is simple a product to operating that is not required to training from a “Laser safety officer”.
In case of any failure, do not disassemble the instrument. Contact TOPCON or your TOPCON
dealer.
Total Station GTS-900A, GPT-9000A series
The software must be of the correct version for your version of the GTS-900A, GPT-9000A series,
otherwise the RC-3 will not function properly. Contact TOPCON or your TOPCON dealer for
version information.
Class 1 Laser Product
Invisible Laser Beam
To Next Page
Loading...
Need help?
General
