12
COMPONENT NAMES
KR-8800
Print switch...........................Prints out the measurement result. When there is no mea
-
surement value, press the switch to feed paper.
Menu switch .........................Displays the menu screen.
IOL switch ............................Press the switch to try measurement when errors are
likely, for example, eyes with IOL.
Graphic print switch..............Prints out graphically the state of refraction.
Target image switch .............Allows the operator to observe the stored target image on
the monitor screen.
Fixation target brightness switch
....Changes the brightness of fixation target.
CYL display selection switch
....Changes the CYL display.
Measurement mode switch
.......Changes the measurement mode.
Auto start switch...................Switch between auto start and manual mode.
Cornea diameter switch .......Measures the cornea diameter.
Print switch Menu switch
IOL switch
Measurement
mode switch
Target image
observation switch
Fixation target
brightness switch
CYL (cylinder)
display selection
switch
Graphic print switch Auto start switch
Cornea diameter
switch
CYL
R
K
To Next Page
Loading...
Need help?
General
