74
INDIVIDUAL OPERATIONS
INPUT/OUTPUT USING RS232C
OUTPUT USING RS232C
This instrument can output data to PC and the like via the RS232C interface.
1 Make sure of the connection to RS232C OUT.
For connection, see “CONNECTING EXTERNAL I/O TERMINALS” on page 20.
2 Make sure of data communication settings.
For data communication settings, see “ON-LINE (DATA COMMUNICATION)” on page 41.
3 Do measurements.
4 Press the of the control panel.
When output is completed, “ DATA OUT” is displayed in the monitor screen.
INPUT USING RS232C
This instrument can input ID numbers from a bar code reader and the like via the RS232C
interface.
1 Make sure of the connection of RS232C OUT.
For connection, see “CONNECTING EXTERNAL I/O TERMINALS” on page 20.
2 Make sure of data communication settings.
For data communication settings, see “ON-LINE (DATA COMMUNICATION)” on page 41.
3 Confirm the measurement screen.
4 Input ID numbers from the external device.
The input ID numbers are displayed in the monitor screen.
PRINT SWITCH
To Next Page
Loading...
