2
PRECAUTIONS
BASIC INSTRUCTIONS
To prevent your fingers from getting caught in the instrument, be aware of all moving parts.
W
ORKING ENVIRONMENT
Temperature: 10°C-40°C
Humidity: 30-75% (without dew)
Atmospheric Pressure: 700hPa-1,060hPa
STORA
GE METHOD
1. ENVIRONMENTAL CONDITIONS
Temperature: 10 °C-40 °C
Humidity: 30-75% (without dew)
Atmospheric Pressure: 700hPa-1,060hPa
2. IF THE INSTRUMENT IS PLACED IN STRAGE, KEEP IT
(1) Free from water splashes
(2) Free from adverse effects due to atmospheric pressure, temperature, moisture, ventilation,
sunlight, dust, salt content, sulfur, etc.
(3) Stable and free from vibration shock (including transportation) and insure that it is always
stored in an upright position.
(4) Free from chemicals and gases
TRANSPOR
T CONDITION
Temperature: -20°C-50°C
Humidity: 10-95%
MAINTENANCE AND CHECKS
1.Regularly maintain and check all equipment and parts.
2.Before using equipment that has not been used in a while, be sure to confirm normal and
safe operation beforehand attempting any patient measurements.
3.Keep the examination window free from finger prints and dust.
4.When the instrument is not in use, protect the instrument by covering it with the dust cover.
5.When the examination window becomes dirty or soiled, clean it according to the instructions
listed in “CLEANING THE INSTRUMENT” on page 81 of the Instruction Manual.
To Next Page
Loading...
Need help?
General
