Topcon RM-8800 User Manual

22
PREPARATIONS
INITIAL SET SCREEN
In the INITIAL SET screen, buzzer sound, refractory power shift, display of typical value in
monitor screen and date can be changed.
1 In the “INITIAL MENU SCREEN”, make sure that the cursor is on “INITIAL SET”, and then
press the . The monitor screen is changed to the INITIAL SET SCREEN.
BUZZER SOUND SETTING
The buzzer sound can be set. Before shipment, it is set to (YES) so that the buzzer sounds.
1 In the “INITIAL MENU SCREEN”, choose “INITIAL SET” and get the “INITIAL SET
SCREEN”.
2 Press the , and choose “YES” (buzzer sound) or “NO” (no buzzer sound)
of “BUZZER”.
3 Setting is done by pressing the , and the cursor goes to the next
item.
• Close the “INITIAL SET SCREEN” and call the “INITIAL MENU SCREEN”.
• Move the cursor to “EXIT”.
• Press the .
To return to the previous item in the screen:
While pressing the , press the .
PRINT SWITCH
MEASURE SWITCH ITEM
PRINT SWITCH SELECT
BUZZER
YES
DPTR SHIFT
AVERAGE DISP.
DATE
INIT AUTO
C.D MEMORY
NO
CREDIBILITY NUM
INITIAL SET
PRINT SWITCH
PRINT SWITCH
MEASUREMENT SWITCH
MEASURE SWITCH ITEM
PRINT SWITCH SELECT
BUZZER
YES
DPTR SHIFT
AVERAGE DISP.
DATE
INIT AUTO
C.D MEMORY
NO
CREDIBILITY NUM
INITIAL SET
PRINT SWITCH
MEASUREMENT SWITCH

Topcon RM-8800 Specifications

General

Brand	Topcon
Model	RM-8800
Category	Measuring Instruments
Language	English