Topcon RM-8800 - Custom-Print Settings

35
PREPARATIONS
CUSTOM-PRINT SETTINGS
This machine provides the ability to select the items to be printed, called the custom print
function. On the custom-print screen, the details of the following items can be changed
individually: refraction measurement values, cornea measurement values, corneal
astigmatism and axial angles, PD values, the name, date, VD values, cylindricity mark and the
TOPCON mark On/Off.
1 On the “PRINT OUT SCREEN”, press the and move the cursor to
“PRINT TYPE”.
2 Press the , select “CSTM” and press the .
The monitor screen changes to the “CSTM PRINT SCREEN”.
To exit this screen
• Move the cursor to “EXIT”, then press the .
Close the “CSTM PRINT SCREEN” and call the “PRINT OUT SCREEN”.
• Move the cursor to “EXIT”.
• Press the .
Return to the previous item in the screen
• Hold the down and press the .
MENU SWITCH
PRINT SWITCH
IOL SWITCH
ALL
AVE
MEASURE SWITCH ITEM
PRINT SWITCH SELECT
REF PRINT
KRT PRINT
KRT AVE PRINT
KRT CYL PRINT
PD PRINT
NAME PRINT
CSTM PRINT
PRINT SWITCH
PRINT SWITCH
PRINT SWITCH
MEASUREMENT SWITCH