Topcon RM-8800 - Page 38

36
PREPARATIONS
CHANGING THE PRINT TYPE OF REFRACTION MEASUREMENT VALUES
The print type of refraction measurement values may be changed. Before shipment it is set to
“ALL” (print all data).
1 On the “PRINT OUT SCREEN”, move the cursor to “PRINT TYPE”, and with “CSTM”
selected, press the and get the “CSTM PRINT SCREEN ”.
2 Press the and move the cursor to “REF PRINT”.
3 Press the and select
ALL (Print all data), or
AVE (Print typical values only)
4 Press the . , and the cursor moves to the next item.
CHANGING THE PRINT TYPE OF CORNEA MEASUREMENT VALUES (Only in KR-8800)
The print type of cornea measurement values may be changed. Before shipment it is set to
“AVE” (print typical values only).
1 On the “PRINT OUT SCREEN”, move the cursor to “PRINT TYPE”, and with “CSTM”
selected, press the and get the “CSTM PRINT SCREEN”.
2 Press the and move the cursor to “KRT PRINT”.
3 Press the and select
ALL (Print all data), or
AVE (Print typical values only)
4 Press the , and the cursor moves to the next item.
IOL SWITCH
ALL
AVE
MEASURE SWITCH ITEM
PRINT SWITCH SELECT
REF PRINT
KRT PRINT
KRT AVE PRINT
KRT CYL PRINT
PD PRINT
NAME PRINT
CSTM PRINT
MEASUREMENT SWITCH
PRINT SWITCH
MEASUREMENT SWITCH
IOL SWITCH
ALL
AVE
MEASURE SWITCH ITEM
PRINT SWITCH SELECT
REF PRINT
KRT PRINT
KRT AVE PRINT
KRT CYL PRINT
PD PRINT
NAME PRINT
CSTM PRINT
MEASUREMENT SWITCH
PRINT SWITCH
MEASUREMENT SWITCH