Topcon RM-8800 - Number Setting (Patient;Instrument IDs)

27
PREPARATIONS
NO. SETTING
In the “NUMBER SET” screen, patient No. setting, monitor screen display of patient No.,
printing patient No., resetting of patient No., instrument No. setting, monitor screen display of
instrument No. and printing instrument No. can be changed.
1 In the “INITIAL MENU SCREEN”, press the and move the cursor
to “NUMBER SET”.
2 Press the , and the monitor screen is changed to the “NUMBER SET
SCREEN”.
SETTING PATIENT NO.
The patient No. can be set between 0 and 9999. Before shipment, it is set to “0001”.
1 In the “INITIAL MENU SCREEN”, choose “NUMBER SET” and get the “NUMBER SET
SCREEN”.
2 Press the and move the cursor to “SERIAL NO”.
3 Pressing the increases the value.
Pressing the decreases the value.
4 Press the , and the cursor moves to the next item.
• Close the “NUMBER SET SCREEN” and call the “INITIAL MENU SCREEN”.
• Move the cursor to “EXIT”.
• Press the .
To return to the previous item in the screen:
• While pressing the , press the .
MEASUREMENT SWITCH
PRINT SWITCH
IOL SWITCH DOWN
MENU SWITCH UP
MEASURE SWITCH ITEM
SERIAL NO.
0001
SERIAL OUT TV
SERIAL OUT PRT
SERIAL RESET
INSTRUMENT NO.
INSTRUMENT TV
INSTRUMENT PRT
EXIT
NUMBER SET
PRINT SWITCH
PRINT SWITCH
MEASUREMENT SWITCH
IOL SWITCH DOWN
MENU SWITCH UP
MEASURE SWITCH ITEM
SERIAL NO.
0001
SERIAL OUT TV
SERIAL OUT PRT
SERIAL RESET
INSTRUMENT NO.
INSTRUMENT TV
INSTRUMENT PRT
EXIT
NUMBER SET
MEASUREMENT SWITCH
MENU SWITCH
IOL SWITCH
MEASUREMENT SWITCH