50
PREPARATIONS
PRINTER PAPER SETTING
AUTO SETTING
1 While pressing the thumb to the surface, slide off the printer cover.
2 Turn the paper retainer lever to the illustrated position.
3 Set the paper into the shaft support, taking care of the roll direction of paper. Pull out the
paper top 7-8cm forward.
4 Insert the paper straight along the paper guide.
NOTE:
• Note that printing cannot be done if the paper back faces up by set-
ting the roll in opposite direction.
NOTE:
• Please insert the paper deep enough into the printer.
otherwise the paper may not come out. At this time “PAPER END”
will be displayed on the monitor.
Printer cover
Paper retainer lever
Roll direction
To Next Page
Loading...
Need help?
General
