4
SAFETY CAUTIONS
Icon Meaning Page
To avoid electric shocks, do not attempt overhauling, rebuilding or
repairs. Ask your dealer for repair.
76
To avoid electric shocks, do not remove covers from bottom and top
surfaces, monitor, measuring unit, etc.
76
To prevent shock hazard, do not allow water or other foreign matter
to enter the instrument.
––
To avoid fire and electric shocks in case of tumbling, do not place a
cup or vessel containing water/fluid on the instrument.
––
To avoid electric shocks, do not insert objects metals through vent
holes or gaps or contain them inside the machine body.
––
To avoid electric shocks during fuse change, be sure to unplug the
power cable before removing the fuse lid. Also, do not plug the
power cable leaving the fuse box open.
83
Always use the attached fuse (T-3A,250V). Using any other type
may cause troubles and fire.
83
Should any anomaly, such as smoke, occur, immediately switch
OFF the power source and unplug the power cable. Continued use
ignoring the condition may cause fire. Ask your dealer for repair.
––
WARNINGS
To Next Page
Loading...
