5
SAFETY CAUTIONS
Icon Meaning Page
Before moving the instrument, fasten the clamping knob at the bot-
tom surface to stop movements. Negligence of this may cause
injury by falling parts.
19
When moving the instrument, be sure to hold it at the bottom sur-
face with two persons. Carrying by one person may cause a back-
ache or injury by falling parts. Also, holding area other than the
bottom surface may cause pinching fingers between parts and
injury by falling parts as well as damage to the instrument.
19
To prevent injury due to tumbling of the instrument body and falling
parts, avoid a slope and unstable floor for installation.
19
To avoid electric shocks, do not handle the power plug with
wet fingers.
20
To avoid injury, do not insert fingers under the chinrest.
*Be sure to instruct the patient about this.
57
This instrument has been tested (with 120V/230V) and found to
comply with IEC60601-1-2: 2001.
This instrument radiates radio frequency energy within standard
and may affect other devices in vicinity.
If you have discovered that turning on/off the instrument affects
other devices, we recommend you change its position, keep a
proper distance from other devices, or to change the outlet.
Please consult the dealer from whom you purchased the equipment
for any questions.
––
CAUTIONS
To Next Page
Loading...
Need help?
General
