Topcon RM-8800 User Manual

23
PREPARATIONS
SHIFTING REFRACTORY POWER
The refractory power (S value) can be shifted.
1 In the “INITIAL MENU SCREEN”, choose “INITIAL SET” and get the “INITIAL SET”
screen.
2 Press the and move the cursor to “DPTR SHIFT”.
3 Pressing the increases the value.
Pressing the decreases the value.
Values can be set at 0.12D steps between -1.00D and +1.00D.
4 Press the , and the cursor goes to the next item.
MONITOR SCREEN DISPLAY OF TYPICAL VALUE
The typical value can be displayed in the monitor screen. Before shipment, it is set to “NO”
(no display).
1 In the “INITIAL MENU SCREEN”, choose “INITIAL SET” and get the “INITIAL SET
SCREEN”.
2 Press the and move the cursor to “AVERAGE DISP”.
3 Press the and choose “YES” (display in measuring screen) or
“NO” (no display in measuring screen).
4 Press the , and the cursor goes to the next item.
For “YES” setting, set “DISPLAY STYLE” to “LAYOUT 2”.
To set “DISPLAY STYLE” to “LAYOUT 2”,see “CHANGE DISPLAY STYLE” on
page 26.
IOL SWITCH DOWN
MENU SWITCH UP
MEASURE SWITCH ITEM
BUZZER
DPTR SHIFT
AVERAGE DISP.
DATE
INIT AUTO
C.D MEMORY
+0.37
CREDIBILITY NUM
INITIAL SET
MEASUREMENT SWITCH
MENU SWITCH
IOL SWITCH
MEASUREMENT SWITCH
MEASURE SWITCH ITEM
PRINT SWITCH SELECT
BUZZER
DPTR SHIFT
AVERAGE DISP.
DATE
INIT AUTO
C.D MEMORY
CREDIBILITY NUM
INITIAL SET
YES
NO
MEASUREMENT SWITCH
PRINT SWITCH
MEASUREMENT SWITCH

Topcon RM-8800 Specifications

General

Brand	Topcon
Model	RM-8800
Category	Measuring Instruments
Language	English