Topcon RM-8800 - Page 26

24
PREPARATIONS
CHANGING DATE DISPLAY
The date format of printout can be changed. Before shipment, it is set to “2003.12.01”.
1 In the “INITIAL MENU SCREEN”, choose “INITIAL SET” and get the “INITIAL SET
SCREEN”.
2 Press the and move the cursor to “DATE”.
3 Press the and choose:
2003.12.01,
DEC. 01. 2003, or
01. DEC. 2003.
4 Press the , and the cursor moves to the next item.
START MODE AFTER POWER ON (Only in KR-8800)
The start mode can be set. Before shipment, it is set to “YES” (Auto start mode).
1 In the “INITIAL MENU SCREEN”, choose “INITIAL SET” and get the “INITIAL SET
SCREEN”.
2 Press the and move the cursor to “INIT AUTO”.
3 Press the and choose “YES” (Auto start ) or “NO” (Manual start ).
4 Press the ,and the cursor moves to the next item.
MEASURE SWITCH ITEM
PRINT SWITCH SELECT
BUZZER
DPTR SHIFT
AVERAGE DISP.
DATE
2003.12.01
DEC.01.2003
01.DEC.2003
INIT AUTO
C.D MEMORY
CREDIBILITY NUM
INITIAL SET
MEASUREMENT SWITCH
PRINT SWITCH
MEASUREMENT SWITCH
MEASUREMENT SWITCH
MEASURE SWITCH ITEM
PRINT SWITCH SELECT
BUZZER
DPTR SHIFT
AVERAGE DISP.
DATE
INIT AUTO
C.D MEMORY
YES
NO
CREDIBILITY NUM
INITIAL SET
PRINT SWITCH
MEASUREMENT SWITCH