72
INDIVIDUAL OPERATIONS
5 Store the image of left eye in like manner.
6 Press the .
7 Make sure of the cornea diameter screen.
8 Bring the left positioning bar to the left end of iris by pressing the (for
moving left) and (for moving right).
9 Press the . The cornea diameter is displayed.
10 Press the . The measurement mode of left eye sets in.
Measure also the left eye in like manner.
If it is necessary to move the left positioning bar again, press the
. When the is pressed
further, right and left positioning bars return to the initial positions.
• When the image of only one eye is necessary, press the
after storing the image.
• When images of both eyes are stored, the left/right eye screen can be switched
by pressing the .
CORNEA DIAMETER
L
R L
(Measuring the left eye only)
CORNEA DIAMETER SWITCH
AUTO START SWITCH
TARGET IMAGE SWITCH
MEASUREMENT MODE SWITCH MEASUREMENT MODE SWITCH
MEASUREMENT SWITCH
MEASUREMENT SWITCH
CORNEA DIAMETER SWITCH
CORNEA DIAMETER MEASUREMENT SWITCH
To Next Page
Loading...
Need help?
General
