Tormax Automatic Smart Drive 1101 - Door Leaf Mounting with Standard Linkage; 4.2 Door Leaf Mounting Standard Linkage Guide; Template Application and Hole Drilling; Attaching Cone and Fastening Components

12 Installation On Site SWINGDOOR Smart Drive 1101 T-1132 e
T1132/10
4.2 Door Leaf Mounting Standard Linkage
310
540
B
C
D
E
G
M
L
T1132/29
45
A
50
I
80
K
F
H
M
T1132/26
540
20
50
2x Ø7
4x Ø7
30
8
23
580
290
Z
Y
45
20
X
70.5
116
85
20
80
310
290
Y
Z
0 – 10 33
X
–40…+107
+105…+252
0 – 70 93
–40…+107
+105…+252
A) Glue on template
B) Drill holes
C) Attach cone, length according Y, surfaces parallel to side
plates
D) Tighten hexagon-socket screw
E) Fasten operator
F) Fasten bearing trestle according to dimensional specifi-
cations on lintel
G) Attach connecting part at right-angle to the operator to
cone (length in accordance with Y)
H) Interconnect bearing trestle and adjustment member
I) Adjust adjustment member at right-angle to the lintel and
tighten screws
K) Interconnect connecting part and adjustment member
L) Fasten covers
M) Snap in side plates