17
8. Acting upon the squeegee lifting lever (12)
lower the squeegee.
9. Acting upon the levers drive control (9) the
machine starts to move, the base starts to vibrate
and the squeegee starts to dry.
10. During the rst stretches check that the
squeegee adjustment guarantees a perfect dry-
ing action and that the detergent solution ow is
appropriate. It has to be sufcient to wet the oor
uniformly. Always consider that the correct quan-
tity of solution detergent depends on type of oor,
dirtiness and machine speed.
FORWARD MOVEMENT
The traction of the machine is given through an
electronically controlled motor.
To move the machine, switch on the key and then
rotate the levers drive control placed on the han-
dle bar, in forward you obtain the forward drive,
in reverse the backwards movement is obtained.
The control acts in a progressive way, therefore it
is possible to graduate the speed depending on
each requirement rotating the lever whatever it
is necessary. During reverse motion the speed is
reduced.
Moving the machine backwards, make sure that
the squeegee is lifted.
SPEED ADJUSTMENT
Two values of the maximum drive working speed
in forward movement can be chosen.
Set the wanted speed through the speed selec-
tion switch (14).
WORKING BRAKE
To stop the machine during normal working situ-
ation, it is sufcient to release the levers drive
control, as the machine is equipped with an elec-
tronic braking system. The base and the deter-
gent solution ow stop automatically.
EMERGENCY BRAKE
In case of an emergency, an immediate stop can
be obtained acting upon the lever of the emer-
gency and parking brake (10) by pushing it down-
wards.
This control blocks the machine immediately. The
emergency brake functions also as a parking
brake. To start again to work, release the lever by
unblocking the parking button on the lever itself
and act again upon the levers drive control.
https://harrissupplyind.com - To Order Parts Call 608-268-8080
To Next Page
Loading...
Need help?
General