19
5. Bring the machine to an appropriate place for
tanks draining.
6. Turn the key (8) counterclockwise.
7. Insert the parking brake (10).
DAILY MAINTENANCE
RECOVERY TANK CLEANING
1. Hold the exhaust hose placed in the front part
of the machine.
2. Take off the exhaust plug acting upon its lever
and empty the recovery tank into appropriate
containers.
3. Take off suction cover (1) after rotating the
blocking levers (2).
4. Take off the lter and lter protection.
5. Rinse the tank with water jet.
SUCTION FILTER CLEANING
1. Take off suction cover (1) after rotating the
blocking levers (2).
2. Take off the lter and lter protection.
3. Clean all parts with a water jet especially in-
side surfaces and lter bottom.
4. Carry out cleaning operations carefully.
5. Reassemble all parts.
PAD DISASSEMBLY
To disassemble the pad proceed as follows:
Moving the pedal (13) lift the base to take off the
pad.
SQUEEGEE CLEANING
Keeping the squeegee clean guarantees always
the best drying action.
For its cleaning it is necessary to:
1. Take off the squeegee hose (3) from the cou-
pling.
https://harrissupplyind.com - To Order Parts Call 608-268-8080
To Next Page
Loading...
Need help?
General