Part No. 92783SL, Rev. B
Service Manual
Reelmaster
®
216/216-D
Preface
This publication provides the service technician with
information for troubleshooting, testing, and repair of
major systems and components on the Reelmaster 216
and Reelmaster 216-D
REFER TO THE REELMASTER 216 OR 216-D
OPERATOR’S MANUAL FOR OPERATING, MAIN-
TENANCE AND ADJUSTMENT INSTRUCTIONS.
Space is provided at the end of Chapter 2 in this publi-
cation to insert the Operator’s Manuals and Parts
Catalogs for your machine. Replacement Operator’s
Manuals are available by sending complete Model and
Serial Number of traction unit and cutting unit to:
The Toro Company
8111 Lyndale Avenue South
Minneapolis, MN 55420
The Toro Company reserves the right to change product
specifications or this publication without notice.
see
This safety symbol means DANGER, WARN-
ING, or CAUTION, PERSONAL SAFETY IN-
STRUCTION. When you this symbol,
carefully read the instructions that follow.
Failure to obey the instructions may result in
personal injury.
NOTE: A NOTE will give general information about the
correct operation, maintenance, service, testing or
repair of the machine.
IMPORTANT: The IMPORTANT notice will give im-
portant instructions which must be followed to
prevent damage to systems or components on the
machine.
Reelmaster 216 Reelmaster 216-D
© The Toro Company - 1991, 1994, 1996
To Next Page
Need help?
General
