Toro 04591 User Manual

Settings (cont'd.)
M AX M OW
Sets the maximum machine
speed while mowing.
M AX T RANSPORT
Sets the maximum machine
speed while transporting.
M AX R EVERSE
Sets the maximum machine
speed while moving the
machine in reverse.
S LOW & T URN
Enables or disables the slow
and turn function.
3WD K IT
Enables or disables the
3-Wheel Drive Kit.
B ATT . R ESERVE
Sets the distance that is
needed to transport the
machine back to the shop
when the battery level
becomes low .
About
Menu Item Description
M ODEL
Lists the model number of the
machine.
SN Lists the serial number of the
machine.
S/W Rev Lists the software revision of
the master controller .
I NFO C ENTER
Lists the software revision of
the InfoCenter .
CU1
Lists the software revision of
the center cutting unit motor .
CU2
Lists the software revision of
the front, left cutting unit motor .
CU3
List the software revision of
the front, right cutting unit
motor .
LL1
Lists the software part number
and the revision version for
the center cutting unit.
LL2
Lists the software part number
and the revision version for
the front left cutting unit.
LL3
Lists the software part number
and the revision version for
the front right cutting unit.
T RACTION 1
Lists the software part number
and the revision version for
the front right traction motor .
T RACTION 2
Lists the software part number
and the revision version for
the front left traction motor .
S TEERING
Lists the software part number
and the revision version for
the rear steering motor .
About (cont'd.)
P RECHARGE
Lists the software part number
and the revision version for
the precharge controller .
B ATTERY
Lists the software part number
and the revision version for
the battery .
CAN B US
Lists the machine
communication bus status.
T RACTION 3
Lists the software part number
and the revision version for
the 3-Wheel Drive Kit (if
equipped).
Note: Protected under Protected
Menus—accessible only by entering PIN;
refer to Accessing Protected Menus ( page 22 ) .
Accessing Protected Menus
Note: The factory default PIN code for you machine
is either 0000 or 1234.
If you changed the PIN code and forgot the code,
contact your authorized T oro distributor for assistance.
1. From the M AIN M ENU , use the center button to
scroll down to the S ETTINGS M ENU and press the
right button.
2. In the S ETTINGS M ENU , use the center button to
scroll down to the P ROTECTED M ENU and press
the right button.
3. T o enter the PIN code, press the center button
until the correct rst digit appears, then press
the right button to move on to the next digit.
Repeat this step until the last digit is entered and
press the right button once more.
4. Press the middle button to enter the PIN code.
W ait until the red indicator light of the InfoCenter
illuminates.
Note: If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
“PIN” displays in the upper right corner of the
screen.
Y ou have the ability to view and change the settings in
the Protected Menu. Once you access the Protected
Menu, scroll down to the Protect Settings option. Use
the right button to change the setting.
• Setting the Protect Settings to O FF allows you to
view and change the settings in the Protected
Menu and view the CU motor and traction
information screens without entering the PIN code.
• Setting the Protect Settings to O N hides the
protected options and requires you to enter the PIN
code to change the setting in the Protected Menu.
22

Toro 04591 Specifications

General

Brand	Toro
Model	04591
Category	Lawn Mower
Language	English