Toro 23518 - Premaintenance Procedures; Preparing for the Machine for Maintenance; Accessing the Console Compartment

MaintenanceService
Interval
MaintenanceProcedure
Every500hours
•Replacethesecondaryaircleanerelement.(Mayneedmoreoftenundersevere
conditions.SeetheEngineOwner’sManualforadditionalinformation.)
•Replacethepaperair-cleanerelement(moreoftenundersevereconditions).
Every800hours
•Replacethefuellter.
Yearly
•Greasethefrontcasterpivots.
•Greasethebeltidlerpivot.
•Greasethecasterpivotsandhubs.
•Lubricatethecasterwheelhubs.
•Lubricatethecasterwheelhubs.
•Checkthetorqueofthewheelhubnuts.
•Checkthetorqueonthewheellugnuts.
•Checkthetorqueofthetransmissionoutputshaftnut.
Yearlyorbeforestorage
•T ouchupchippedpaint
Premaintenance
Procedures
CAUTION
Raisingthemachineforserviceormaintenance
relyingsolelyonmechanicalorhydraulicjacks
couldbedangerous.Themechanicalorhydraulic
jacksmaynotbeenoughsupportormay
malfunctionallowingthemachinetofall,which
couldcauseinjury.
Donotrelysolelyonmechanicalorhydraulicjacks
forsupport.Useadequatejackstandsorequivalent
support.
PreparingfortheMachinefor
Maintenance
Performthefollowingbeforeservicing,cleaning,ormaking
anyadjustmentstothemachine.
1.Movethemachinetoalevelsurface.
2.TurnthekeyintheignitionswitchtotheOFFposition,
settheparkingbrake,waitforallmovingpartstostop.
3.Removethekeyfromthekeyswitch.
AccessingtheConsole
Compartment
RemovingtheConsolePad
1.Loosenthe4anged-headboltsthatsecurethepadto
theleftandrightconsolepanels(Figure29).
Figure29
1.Keyholeslot(console
panel)
3.Pad
2.Fanged-headbolt
2.Liftuptheconsolepad(Figure29)approximately13
mm(1/2inch).
3.Pulltheconsolepadstraightbackandremovethepad
fromthemachine(Figure29).
InstallingtheConsolePad
1.Alignthe4anged-headboltsattheforwardfaceof
theconsolepadtothe4keyholeslotsintheframeof
theconsole(Figure29).
2.Movethepadforwarduntilthepadisushtothe
consoleframe(Figure29).
3.Movethepaddownuntiltheanged-headboltsare
seatedinthekeyholeslots(Figure29).
4.Torquetheanged-headboltsto1978to2542N-cm
(175to225lb-in).
28