Toro 23518 - Hydraulic System Maintenance; Maintaining the Auxiliary Hydraulic System

F.Removethespring-clevispin,rotatethe
turnbuckleclockwise1-additionalturn,andinsert
thespring-clevispin(Figure57).
5.Repeatsteps4Athrough4Ffortheother
traction-controllinkage.
HydraulicSystem
Maintenance
MaintainingtheAuxiliary
HydraulicSystem
Hydraulicoiltype:AW-32hydrooil
CheckingtheAuxiliaryHydraulicFluid
Level
ServiceInterval:Every50hours
1.Parkthemachineonalevelsurface.
2.Lowerthetinestotheground.
3.Stoptheengine,settheparkingbrake,removethekey,
andwaitforallmovingpartstostopbeforeleavingthe
operatingposition.
4.Removetheconsolepad;refertoRemovingthe
ConsolePad(page28).
5.Cleanareaaroundhydraulicreservoircap(Figure58).
Figure58
1.Coldoillevel
2.Hotoillevel
6.Removethecapandcheckhydraulicoillevelinthe
reservoir(Figure58).
Note:Thehydraulicoillevelshouldcovertheword
Coldthatisembossedintothebafeofthereservoir.
7.Ifnecessary,addthespeciedhydraulicoiltothe
reservoiruntiltheoilcoverstheColdoillevelonthe
bafe(Figure58).
Note:ThebafeionthereservoirislabeledHotand
Cold.Youwillllthereservoirtotheappropriatelevel
dependinguponthetemperatureoftheoil.Theoil
levelwillvarywiththetemperatureoftheoil.The
Coldlevelshowstheleveloftheoilwhenitisat24°C
(75°F).TheHotlevelshowsthelevelofoilwhenit
isat107°C(225°F).
44