Toro 23518 - Page 45

Forexample:Iftheoilisatambient-airtemperature
(about24°C(75°F)),llonlytotheColdlevel.Ifthe
oilisabout65°C(150°F),lltohalfwaybetweenthe
HotandColdlevels.
8.Replacehydraulicreservoircapandtightenuntilsnug
(Figure58).
Note:Donotovertightenthereservoircap.
9.Installtheconsolepad;refertoRemovingtheConsole
Pad(page28).
ChangingtheAuxiliary
Hydraulic-ReservoirOilandFilter
ServiceInterval:Aftertherst100hours
Every250hoursthereafter
1.Stoptheengine,settheparkingbrake,removethekey,
andwaitforallmovingpartstostopbeforeleavingthe
operatingposition.
2.Carefullycleanareaaroundthefrontoftheauxiliary
pump,thellcapforthereservoir,andthelter
(Figure59).
Note:Itisimportantthatnodirtorcontamination
enterhydraulicsystem.
Figure59
3.Atthefrontoftheauxiliary-hydraulicpump,remove
theinlethosefromthehydraulicttinginthepump,
placetheendofthehoseinadraincontainer,and
allowoiltodrain(Figure60).
Figure60
1.Hydraulictting
(auxiliary-hydraulicpump)
3.Draincontainer
2.Inlethose
4.Cleanaroundthettingforthehydraulicpump.
5.Rotatetheauxiliary-hydraulicltercounterclockwise
andremoveitfromthebaseofthelteradapter
(Figure61).
Note:theltertoremoveandallowoiltodrain.
Figure61
1.Auxiliary-hydrauliclter
2.Filteradapter
6.Applyathincoatofspeciedoilontothesealofthe
newhydrauliclter.
7.Installthelterbyrotatingitclockwiseontothelter
adapteruntilthesealcontactsthelteradapter,then
tightenthelteranadditional2/3to3/4turn(Figure
61).
8.Installtheinlethoseontothettinginthepumpand
torquethehosettingto50N-m(37ft-lb).
9.AddthespeciedoiluntilthelevelreachestheColdll
linelocatedonthereservoirtank;refertoCheckingthe
AuxiliaryHydraulicFluidLevel(page44).
10.Startengineandraiseandlowerthetines.
45