Figure 23
Using the Mid-Size Weight
W eights are a v ailable for cer tain mo w ers to
impro v e balance and impro v e perfor mance . T he
w eights can be mo v ed or remo v ed to create
optimized perfor mance under different mo wing
conditions and for operator preference ( Figure 24
or Figure 25 ).
Contact an A uthorized Ser vice Dealer for the
cor rect W eight Kit and installation.
• Any rear w eight m ust be remo v ed when a
T r u–T rac k
®
Sulk y is installed.
• W hen a T r u–T rac k
®
Sulk y is installed front
w eights are needed. Contact an A uthorized
Ser vice Dealer for the cor rect quantity of
w eights and placement.
T he fr ont end of the machine can rapidl y rise
up when the mo w er is r emo v ed. T his could
cause serious injur y to y ou or bystander s.
Suppor t the r ear of the machine when
r emo ving the mo w er f or m the car rier frame.
Figure 24
Installing optional front weight.
1. Bolt 3. Weight
2. Washer
4. Nut
Figure 25
Installing optional rear weight.
1. Nut
3. Washer
2. Weight 4. Bolt
25
To Next Page
Loading...
