Problem
Possible Cause Corrective Action
1. Drive belt is worn, loose
or broken.
1. Check the belt tension.
2. Drive belt is off pulley. 2. Install drive belt and
check adjusting shafts
and belt guides for
correct position.
3. Deck belt is worn, loose
or broken.
3. Install new deck belt.
4. Deck belt is off pulley. 4. Install deck pulley and
check the idler pulley,
idler arm and spring
for correct position and
function.
5. Broken or missing idler
spring.
5. Replace the spring.
6. Electric clutch out of
adjustment.
6. Adjust the clutch air gap.
7. Clutch connector or wire
damaged.
7. Contact an Authorized
Service Dealer.
8. Damaged electric clutch. 8. Contact an Authorized
Service Dealer.
9. Safety interlock system
prevents blade rotation.
9. Contact an Authorized
Service Dealer.
Blades do not rotate.
10. PTO switch is faulty. 10. Contact an Authorized
Service Dealer.
60
To Next Page
Loading...
