Toro 74523 - Replacing the Transmission Belt

ReplacingtheTransmission
Belt
ServiceInterval:Every1,000hours—Replacethe
transmissionbelt.
1.Removethefueltank;refertoRemovingtheFuelTank
(page36).
2.Removethehydraulic-reservoircap.
3.Locatethedrainplugsinthebottomofthetransmission
andplaceadrainpanundertheplug(Figure67).
Figure67
1.Drainplug
4.Allowthehydraulicuidtodrainfromthemachine.
5.Removethelowerhydraulichose(Figure68).
Figure68
1.Lowerhydraulichose3.Tensionspring
2.Transmissionbelt
6.Removethetensionspring(Figure68).
CAUTION
Thespringisundertensionwheninstalled
andcancausepersonalinjury.
Wearsafetyglassesandbecarefulwhen
removingthespring.
7.Removethedeckbeltfromtheclutchandclutchstop
(Figure68).
8.Installthenewbelt.
9.Installthetensionspringandlowerhydraulichose.
10.Installthedrainplugs.
11.Addhydraulicuidtothelllevel.
12.Installthehydraulic-reservoircap.
13.Runthemachinefor10minutesandverifythatthe
hydraulicuidisatthecorrectlevel.
45