Toro 74950 - Adjusting the Tracking; Checking the Tire Pressure

Figure60
1.ROPSknob(locked
position)
3.Rollbarintheupright
position
2.PulltheROPSknobout
androtateit90°tochange
therollbarposition.
4.Rollbarinthefolded
position
AdjustingtheTracking
1.Disengagetheblade-controlswitch(PTO).
2.Drivetoanopenatarea,movethemotion-control
leverstotheNEUTRAL-LOCKposition.
3.Movethethrottlemidwaybetweenfastandslow .
4.Movebothmotion-controlleversallthewayforward
untiltheybothhitthestopsintheT-slot.
5.Checkwhichwaythemachinetracks.
6.Ifittrackstotheright,loosentheboltsandadjustthe
leftstopplatebackwardontheleftT-slotuntilthe
machinetracksstraight(Figure61).
7.Ifittrackstotheleft,loosentheboltsandadjustthe
rightstopplatebackwardontherightT-slotuntilthe
machinetracksstraight(Figure61).
8.Tightenthestopplate(Figure61).
Figure61
Leftcontrollevershown
1.Controllever3.Stopplate
2.Bolt
CheckingtheTirePressure
ServiceInterval:Every50hours/Monthly(whichever
comesrst)
Maintaintheairpressureinthereartiresat90kPa(13psi).
Uneventirepressurecancauseunevencut.Checkthetires
whentheyarecold,togetthemostaccuratepressurereading.
Note:Thefronttiresaresemi-pneumatictiresanddonot
requireairpressuremaintenance.
Figure62
43