GEAR DRIVE SYSTEM
5-43GT Series Tractors Service Manual
5
82. Place the shift fork assembly into the housing (Fig.
589).
84. Slide the brake disc onto the transmission shaft (Fig.
591).
Fig 589 PICT-8283 Fig 591 PICT-8280a
Note: Some transmissions have 2 washers (1 on
each bolt) between the brake assembly and
transmission housing.
85. Position the brake assembly to the transmission
(Fig. 592).
83. Replace the brake pucks and brake disc if worn
or damaged. Install the puck into the transmission
housing (Fig. 590).
Fig 592 PICT-8278a
Fig 590 PICT-8281
To Next Page
Loading...
