Toro Multi Pro 5800-G - Engine-Oil Specification; Checking the Engine Oil

8.Installthecoverontotheair-cleanerbodyand
securethecoverwiththe2latches(Figure74).
Note:Ensurethatthedustvalveisaligned
betweenthe5to7o’clockpositionwhenviewed
fromtheend(Figure74).
9.Alignthecoolant-overowtanktothe
tank-supportbracketandseatthetankrmly
(Figure74).
Important:Ensurethatthepressure-relief
hoseisroutedforwardanddown,andthe
tank-venthoseisroutedrearwardasshown
inFigure74.
10.Lowerthepassengerseat.
Engine-OilSpecication
•Oiltype:APIserviceclassicationSLorhigher.
•Oilviscosity:refertotheengineoilviscosity
tablebelow.
EngineOilViscosityTable
Ambienttemperaturerange
Oilviscosity
Above25°C(77°F)SAE30,SAE10W-30,or
SAE15W-40
0°Cto25°C(32°Fto77°F)SAE20orSAE10W-30
0°Cto20°C(32°Fto-4°F)SAE10WorSAE10W-30
ToroPremiumEngineOilisavailablefromyour
distributorineither15W40or10W30viscosity.Refer
tothePartsCatalogforpartnumbers.
CheckingtheEngineOil
ServiceInterval:BeforeeachuseordailyCheckthe
engineoillevelbeforeyoustartthe
engineforthersttime.
Note:Thebesttimetochecktheengineoiliswhen
theengineiscool,beforeithasbeenstartedforthe
day.Iftheenginewasoperated,allowtheoiltodrain
backdowntothesumpforatleast10minutesbefore
checking.
Theengineisshippedwithoilinthecrankcase;
however,thelevelofoilmustbecheckedbeforeyou
rststarttheengineandafteryouhaverunit.
1.Positionthemachineonalevelsurface.
2.Removethedipstick,locatedunderthe
passengerseat,andwipeitwithacleanrag
(Figure75).
Note:Insertthedipstickintothetubeandmake
sureitisseatedfully.Removethedipstickand
checktheoillevel.
g195363
g195189
Figure75
1.Low
4.Oil-llercap
2.Full5.Dipstick
3.High
3.Iftheoillevelislow,removethellercapfrom
thevalvecover(Figure75)andpouroilintothe
llerneckuntiltheoillevelisuptotheFullmark
onthedipstick.
Note:Addtheoilslowlyandcheckthelevel
oftenduringthisprocess.Donotoverll.
4.Installtheoil-llercap(Figure75).
5.Installthedipstickrmlyinplace(Figure75).
ChangingtheEngineOil
Filter
ServiceInterval:Aftertherst50hours
Every200hoursChangetheltermoreoften
whenoperatingthemachineunderheavyload
orinhightemperatures.
1.Removetheforwardheatshield;referto
RemovingtheForwardHeatShield(page50).
2.Raisetheseats.
57