Toro Multi Pro 5800-G - Replacing the Hydraulic Filters; Changing the Hydraulic Fluid

lledthereservoirwithanalternativeuid,
replacethehydrauliclter.
WARNING
Hothydraulicuidcancausesevereburns.
Allowthehydraulicuidtocoolbefore
performinganymaintenancetothehydraulic
system.
Important:Youmayvoidthewarrantyonsome
componentsifyouuseanyotherlter.
UsetheT ororeplacementlter(SeeyourParts
Manualforthecorrectpartnumber.)
1.Positionthesprayeronalevelsurface,engage
theparkingbrake,shutoffthespraypump,shut
offtheengine,andremovethekey.
2.Locatethe2hydraulicltersonthemachine
(Figure98andFigure99).
Note:1lterisbelowthehydraulic-uidtank
andtheotherlterislocatedattherearofthe
machineontheframe.
•Forwardlter—belowthehydraulictank.
g013791
Figure98
1.Hydraulictank
2.Forwardlter
•Rearlter—locatedonthemachineframe.
g013790
Figure99
1.Rearlter
2.Rearwheels
3.Cleantheareaaroundthelter-mountingarea.
4.Placeadrainpanunderthelter.
5.Removethelter.
Disposeoftheusedlteratacertiedrecycling
center.
6.Lubricatethenewltergasketwithclean
hydraulicuid;refertoHydraulicFluid
Specications(page71).
7.Wipecleanthelter-mountingareawitharag.
8.Threadthelteronuntilthegasketcontacts
themountingplate,thentightenthelteran
additional1/2turn.
9.Starttheengine,setthethrottleatfastidle,and
lettheenginerun3to5minutestopurgeair
fromthehydraulicsystem.
10.Shutofftheengine,checkthehydraulic-uid
level,andcheckforleaks;refertoCheckingthe
HydraulicFluid(page72).
Hydraulic-FluidQuantity
54L(14.3USgallons);refertoHydraulicFluid
Specications(page71)
ChangingtheHydraulic
Fluid
ServiceInterval:Every2,000hours—Ifyou
areusingtherecommended
hydraulicuid,changethe
hydraulicuid.
Every800hours—Ifyouarenotusingthe
recommendedhydraulicuidorhaveever
lledthereservoirwithanalternativeuid,
changethehydraulicuid.
73