Toro ProLine H800 - Setup; Charging the Battery; Checking the Fluid Levels; Checking the Air Pressure in the Tires

Setup
MediaandAdditionalParts
Description
Qty.
Use
Operator'sManual
1
Reviewbeforeoperatingthemachine.
Engineowner'smanual1
Usetoreferenceengineinformation.
DeclarationofConformity
1
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
1
ChargingtheBattery
NoPartsRequired
Procedure
1.Connecta3to4Abatterychargertothebattery
posts.Chargethebatteryatarateof3to4
Auntilthespecicgravityoftheelectrolyte
is1.250orhigherandthetemperatureofthe
batteryisatleast16°C(60°F),withallcells
freelydischarginggas.
2.Whenthebatteryischarged,disconnectthe
chargerfromtheelectricaloutletandthen
disconnectthechargerfromthebatteryposts.
Note:Incompletechargingmayresultin
gassingofthebatteryandtheoverowofbattery
acid,causingcorrosivedamagetothemachine.
2
CheckingtheFluidLevels
NoPartsRequired
Procedure
•Checktheengine-oillevelbeforeyoustartthe
engine;refertoCheckingtheEngine-OilLevel
(page51).
•Checkthecoolantlevelbeforeyoustartthe
engine;refertoCheckingtheCoolingSystemand
CoolantLevel(page62).
•Checkthelevelofthehydraulic-uidlevelbefore
youstarttheengine;refertoCheckingthe
Hydraulic-FluidLevel(page70).
3
CheckingtheAirPressure
intheTires
NoPartsRequired
Procedure
Frontandreartiresairpressurespecication:140
kPa(20psi).
Castertiresairpressurespecication:150kPa
(21psi).
Checktheairpressureinthefrontandreartires
beforetheengineisrststarted.
Note:Thetiresmaybeover-inatedorunder-inated
forshipping;therefore,youmayhavetoadjustthe
airpressureinthetires.
g001055
Figure3
11