Toro ProLine H800 - Cleaning the Rear Slots in the Hopper Door; Disposing of Waste

CleaningtheRearSlotsin
theHopperDoor
ServiceInterval:Beforeeachuseordaily
1.Disengagetheblade-controlswitch(PTO)and
engagetheparkingbrake.
2.Raisethehopper(Figure140)tothefullheight
position;refertoRaisingtheHopper(page30).
g232364
Figure140
3.Dumpthehopper(Figure140)andleaveitinthe
fulldumpedposition,withthereardoorhanging
freely;refertoDumpingtheHopper(page31).
Note:Thehopperdoorautomaticallyunlatches
whendumpingthehopper.
4.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
5.Securetheraisedhopperwiththesafetylocks;
refertoFigure41inSecuringtheHopperinthe
RaisedPosition(page42).
6.Usingcompressedair,clearthegrassand
debrisfromtheslotsinthebottomoftheinternal
metalplateofthehopperdoor.(Figure141).
g232008
Figure141
7.Securethesafetylockstotheirstowedposition;
refertoFigure41inSecuringtheHopperinthe
RaisedPosition(page42).
8.Rotatethehoppertothelevelposition.
9.Lowerthehopper;refertoLoweringtheHopper
(page31).
DisposingofWaste
Engineoil,batteries,hydraulicuid,andengine
coolantarepollutantstotheenvironment.Disposeof
theseaccordingtoyourstateandlocalregulations.
86