Toro ProLine H800 - Greasing the Bearings and Bushings

GreasingtheBearingsand
Bushings
ServiceInterval:Every50hours—Greasethe
bearingsandbushings.When
operatingthemachineinextremely
dustyanddirtyconditions,lubricate
thebearingsandbushingsdaily.
Greasespecication:No.2lithiumgrease
Important:Dustyanddirtyoperatingconditions
couldcausedirttogetintothebearingsand
bushings,resultinginacceleratedwear.
Note:Lubricatethegreasettingsimmediatelyafter
everywashing,regardlessofintervalspecied.
1.Wipegreasettingcleansodebrisisnotforced
intothebearingorbushing.
2.Pumpgreaseintothebearingorbushing.
3.Wipeoffexcessgrease.
Thebearingandbushinglubricationpointsareas
follows:
•Brakeandtractionpedalpivotbushings(Figure
43)
g236053
g236026
Figure43
•Rodttingsforthedeck-liftcylinders(Figure44).
g236051
g235949
Figure44
44