Toro ProLine H800 - Mower Deck Maintenance; Rotating the Mower Deck into the Maintenance Position; Rotating the Mower Deck into the Mowing Position

g236164
Figure101
5.Rotatetheradiatortoaccessthelter;referto
AccessingtheEnginefromtheRightside(page
49)
6.ReplacethehydrauliclterasshowninFigure
102.
g215918
Figure102
7.Addthespeciedhydraulicuidintothelltube
untilyoucanseethattheuidlevelisbetween
the2marksthedipstick(Figure99).
Important:Donotllthehydraulictank
withhydraulicuidabovetheuppermarkin
thedipstick.
8.Starttheengine,cyclethesteeringwheeland
deck-liftcylinders,andcheckforuidleaks.
Allowtheenginetorunforabout5minutes,then
shutitoff.
9.After2minutes,checkthelevelofthehydraulic
uid;refertoCheckingtheHydraulic-FluidLevel
(page70).
MowerDeck
Maintenance
RotatingtheMowerDeck
intotheMaintenance
Position
1.Parkthemachineonalevelsurface.
2.DisengagethePTO,lowerthemowerdeck,and
engagetheparkingbrake.
3.Raisethehopperandengagethemagnetic
safetylocks;refertoSecuringtheHopperinthe
RaisedPosition(page42).
4.Unlatchandremovethegrasschute;referto
ClearingtheGrassChute(page32).
5.Pullandrotatetherearlinkpinsonbothsidesof
themowerdeck.
6.Raisethemowerdeck.
7.Shutofftheengineandremovethekey.
8.Usingthehandleandfootpegontheleftsideof
themowerdeck,rotatethefrontofthemower
deckupwardtothemaintenanceposition.
RotatingtheMowerDeck
intotheMowingPosition
Important:Ensurethatyouremovethe
grasschutebeforeperformingthisprocedure;
otherwise,damagemayoccur.
1.Parkthemachineonalevelsurface.
2.Lowerthemowerdeck.
3.Rotatetherearlinkpinstoreleasethemintothe
rearlinks.
4.Insertthegrasschute,rotatetheoperator’s
seat,andlowerthehopper.
71