Toro ProLine H800 - Maintaining the Hopper; Aligning the Hopper to the Chute Seal

MaintainingtheHopper
AligningtheHoppertothe
ChuteSeal
1.Loosenthe4boltsthatsecurethehopperlift
supportstothepivotttings(Figure136).
g232010
g232011
Figure136
1.Bolts
2.Slidethehopperforwardorrearwarduntilthe
hopperinletalignswiththechuteseal(Figure
137).
g232009
Figure137
1.Chuteseal
2.Hopperinlet
3.Tightenthe4bolts(Figure136).
84