Toro ProLine H800 - Adjusting the Rear Anti-Scalp Rollers; Resetting the PTO Function

2.DisengagethePTO,lowerthemowerdeck,and
engagetheparkingbrake.
3.Shutofftheengineandremovethekey.
4.Removetherollershaft,bolt,andnutsecuring
therollertothedeckbracket(Figure30).
g215276
Figure30
1.Nut3.Bolt
2.Rollershaft
4.Roller
5.Aligntherollerwiththeappropriateholesand
installtheshaftwiththeboltandnut(Figure31).
g215277
Figure31
1.Nut3.Bolt
2.Rollershaft
4.Roller
AdjustingtheRear
Anti-ScalpRollers
Mounttherollerssothatthereisa19mm(3/4inch)
clearancefromtheground.
1.Parkthemachineonalevelsurface.
2.DisengagethePTO,lowerthemowerdeck,and
engagetheparkingbrake.
3.Shutofftheengineandremovethekey.
4.Removethelockpinfromtherollerpin(Figure
32).
g215336
Figure32
1.Rollerpin2.Lockpin
5.Movetherollerpinupordowntothedesired
positionandsecureitwiththelockpin(Figure
32).
6.Repeatsteps4and5ontheothersideand
ensurethatitmatchestheothersetting.
ResettingthePTOFunction
Note:Ifyouleavetheoperator’sseatwhilethe
PTOswitchisintheONposition,themachinewill
automaticallyshutofftheengine.
PerformthefollowingtoresetthePTOfunction:
1.PushinthePTOswitchknob.
2.RotatethekeytotheOFFposition.
3.RotatethekeytotheON/PREHEATposition,then
starttheengine.
4.PulloutthePTOswitchknob.
34