Toro ProLine H800 - Page 40

MaintenanceService
Interval
MaintenanceProcedure
Every200hours
•LubricatethedriveshaftU-joints.
•Torquethewheellugnuts.
•Checktherearwheelalignment.
•Inspectthecooling-systemhoses.
•Checktheconditionofthealternatorbelt.
•Checkthetensionofthealternatorbelt.
•ChecktheconditionofandtensionofthePTObelt.
•AdjustthePTOclutchgap.
•Changethehydraulic-uidlter.
Every250hours
•Changetheengineoilandengine-oillter.
Every300hours
•Changetheoilinthemower-deckgearbox.
Every400hours
•Emptyandcleanthefueltank.
•Inspectthefuellinesandconnections.
Every500hours
•Replacethelterofthefuel/waterseparator.
•Replacethefuel-lterelementtowardthefront,rightside.
Every1,000hours
•Replacethehydraulicuid.
Every1,500hours
•Flushandreplacethecooling-systemuid.
Every1,500hoursor
2years,whichever
comesrst
•Replaceanymovinghoses.
40