Toro ProPass 200 - 4 Mounting the Hopper to the Tow Chassis

g237533
Figure12
Hopperextensionkitinstalled
4
MountingtheHoppertothe
TowChassis
TowChassisCongurationOnly
Partsneededforthisprocedure:
6Bolt
6Flangenut
Procedure
Note:IfyouaremountingtheProPasstopdresser
ontosomethingotherthanthetowchassis,referto
theinstallationinstructionsforyourapplication.
1.Attachaliftingdevicetotheliftingbracketbolted
insidethehopperassembly(Figure13).
g013209
Figure13
1.Liftingbracket
WARNING
Donotattempttoliftthebedandhopper
withtheTow-BehindChassis,ProGator,
Workman,orTDCChassisconnected.
Theliftingbracketisnotcapableoflifting
theentiremachine.
2.Usingaliftingmechanism,positionthehopper
overthetowchassis.
3.Lineupthe6mountingholes(3perside)and
installthe5/16x1inchboltsandangenuts.
g013949
Figure14
1.Mountinglocations(3eachside)
4.Removetheliftingbracketfromthehoppersides
andinstalltheboltstothehoppersides.
Note:Retaintheliftingbracketforfutureuse;
donotdiscardit.
12