Toro Spray Master Series - Engine Controls; Spreader Controls

EngineControls
g317354
Figure9
1.Throttlecontrol3.Hourmeter
2.Chokecontrol
4.Ignitionswitch
IgnitionSwitch
Theignitionswitchislocatedattheleftsideofthe
controlconsole(Figure9).
Usetheignitionswitchtostartandrun,orshutoffthe
engine.Theignitionswitchhas3positions:STOP,
RUNandSTART.
Note:Youmustengagetheparkingbraketostart
theengine.
ThrottleControl
Thethrottlecontrolstheenginespeed,andithasa
continuous-variablesettingfromtheSLOWtoFAST
position(Figure9).
ChokeControl
Usethechokecontroltostartacoldengine.
HourMeter
Thehourmeterdisplaysthetotalhoursofengine
operation.Thehourmeter(Figure9)startstofunction
wheneveryourotatethekeyswitchtotheONposition
oriftheengineisrunning.
SpreaderControls
g317353
Figure10
1.Impeller-speedcontrol
3.Diffusercontrol
2.Deectorcontrol
4.Hopper-doorcontrol
Impeller-SpeedControl
Usetheimpeller-speedcontrol(Figure10)tosetthe
speedofthehydraulicmotorforthespreader.
Hopper-DoorControl
Thehopper-doorcontrol(Figure10)opensandcloses
thedoorinsidethebaseofthehopper
DeectorControl
Thedeectorcontrol(Figure10)pivotsthedeector
intothespreaderpattern.
DiffuserControl
Thediffusercontrol(Figure10)shiftstheproduct
placementoftheimpellereithertotheedgeofthe
impellerortothemiddleoftheimpeller.
14