Toro Spray Master Series - Lubrication; Grease Specification; Greasing the Caster Pivots; Lubricating the Caster-Axle Bearings

Lubrication
GreaseSpecication
Greasetype:NationalLubricatingGreaseInstitute
(NGLI)gradeNo.2multi-purposegungrease.
GreasingtheCasterPivots
ServiceInterval:Every100hours
1.Preparethemachineformaintenance;referto
PreparingtheMachine(page51).
2.Wipethegreasettingsatcastercleanwitha
rag(Figure64).
g312856
Figure64
3.Connectagreaseguntothettings(Figure64).
4.Pumpgreaseintothettingsuntilgreasebegins
tocomeoutofthebearings.
5.Wipeupanyexcessgrease.
6.Repeatsteps1through5attheothercaster
pivot.
LubricatingtheCaster-Axle
Bearings
ServiceInterval:Yearly
1.Preparethemachineformaintenance;referto
PreparingtheMachine(page51).
2.Connectagreaseguntothettinginthehubof
thecasterwheel(Figure65).
g314064
Figure65
1.Greasetting(caster-wheelhub)
3.Pumpgreaseintothettingsuntilgreasebegins
tocomeoutofthebearings.
4.Wipeupanyexcessgrease.
5.Repeatsteps2through4attheothercaster
wheel.
53