Toro Spray Master Series - Maintaining the Chassis; Checking the Machine for Loose Hardware; Maintaining the Sprayer and Spreader Systems; Checking the Sprayer System

MaintainingtheChassis
CheckingtheMachinefor
LooseHardware
ServiceInterval:Beforeeachuseordaily
1.Preparethemachineformaintenance;referto
PreparingtheMachine(page51).
2.Visuallyinspectmachinefordamagedorworn
parts,andcheckforloosehardware.
Note:Beforeoperatingthemachine,replace
anydamagedpartsandtightenallloose
hardware.
MaintainingtheSprayer
andSpreaderSystems
CheckingtheSprayer
System
ServiceInterval:Every50hours
1.Preparethemachineformaintenance;referto
PreparingtheMachine(page51).
2.Checkallhoses,nozzles,andttingsfor
damageandleaks.
Note:Replacealldamagedorleakingsprayer
components.
3.Checkthenozzlestrainersandin-linestrainers
foraccumulationofdirtandchemicalsludge.
Note:Cleanorreplacestrainerswithan
accumulationofdirtandchemicalsludge.
CheckingtheSpreader
System
ServiceInterval:Every50hours
1.Preparethemachineformaintenance;referto
PreparingtheMachine(page51).
2.Spraythehoppercables,accuwaycable,and
thedeector-shieldcablewithsiliconespray,if
needed.
3.Cleanthebottomofthehopperwithawirebrush
andcleanoffanyfertilizer,ifneeded.
4.Replacethehopperbottombushingorthe
impeller,ifneeded.
73