Toro Spray Master Series - Sprayer Controls

Drop-RateCamandLinkage
Thedrop-ratecamandlinkagearelocatedatthefront
ofthemachineandbelowthehopperonthespreader
(Figure11).
g027033
Figure11
1.Slot–maximumposition
2.Linkage
Usethedrop-ratecamtosetthemaximumamountof
materialtobedispensedthroughtheimpellergate
andontotheimpeller.
Theslotinthecam,aftersetting9onthecam,
allowsyoutoopentheimpellergatetothemaximum
position.Youcanusethissettingfordrysand,ice
melt,orothermaterialsthataredifculttospread.
Note:Usecamsetting9whenyouarecleaningout
thehopper.
SprayerControls
g317871
Figure12
1.Leftboomsprayer-control
valve
4.Sprayerpressuregauge
2.Centerboom
sprayer-controlvalve
5.Spray-pumpswitch
3.Rightboom
sprayer-controlvalve
Spray-PumpSwitch
Pushthespray-pumpswitch(Figure12)forwardto
turnonspray.
Pushthespray-pumpswitchrearwardtoturnoffspray.
LeftBoomSpray-ControlValve
Pushtheleftboomsprayer-controlvalve(Figure12)
toactivatesprayfortheleftboom.
CenterBoomSpray-ControlValve
Pushthecenterboomsprayer-controlvalve(Figure
12)toactivatesprayforthecenterboom.
RightBoomSpray-ControlValve
Pushtherightboomsprayer-controlvalve(Figure12)
toactivatesprayfortherightboom.
SprayerPressureGauge
Thesprayerpressuregauge(Figure12)displaysthe
pressure(inpsi)whileyouarespraying.
15